Showing posts with label tutoriyal. Show all posts
Showing posts with label tutoriyal. Show all posts

Sunday, October 16, 2011

Improve Your Adsense Earnings

Five Ways To Improve Your Adsense Earnings

Five Ways To Improve Your Adsense Earnings
If webmasters want to monetize their websites, the great way to do it is through Adsense. There are lots of webmasters struggling hard to earn some good money a day through their sites. But then some of the “geniuses” of them are enjoying hundreds of dollars a day from Adsense ads on their websites. What makes these webmasters different from the other kind is that they are different and they think out of the box.
The ones who have been there and done it have quite some useful tips to help those who would want to venture into this field. Some of these tips have boosted quite a lot of earnings in the past and is continuously doing so.
Here are some 5 proven ways on how best to improve your Adsense earnings.

Number One:
Concentrating on one format of Adsense ad. The one format that worked well for the majority is the Large Rectangle (336X280). This same format have the tendency to result in higher CTR, or the click-through rates. Why choose this format out of the many you can use? Basically because the ads will look like normal web links, and people, being used to clicking on them, click these types of links. They may or may not know they are clicking on your Adsense but as long as there are clicks, then it will all be for your advantage.
Number Two:
Create a custom palette for your ads. Choose a color that will go well with the background of your site. If your site has a white background, try to use white as the color of your ad border and background. The idea to patterning the colors is to make the Adsense look like it is part of the web pages. Again, This will result to more clicks from people visiting your site.
Number Three:
Remove the Adsense from the bottom pages of your site and put them at the top. Do not try to hide your Adsense. Put them in the place where people can see them quickly. You will be amazed how the difference between Adsense locations can make when you see your earnings.
Number Four:
Maintain links to relevant websites. If you think some sites are better off than the others, put your ads there and try to maintaining and managing them. If there is already lots of Adsense put into that certain site, put yours on top of all of them. That way visitor will see your ads first upon browsing into that site.
Number Five:
Try to automate the insertion of your Adsense code into the webpages using SSI (or server side included). Ask your web administrator if your server supports SSI or not. How do you do it? Just save your Adsense code in a text file, save it as “adsense text”, and upload it to the root directory of the web server. Then using SSI, call the code on other pages. This tip is a time saver especially for those who are using automatic page generators to generate pages on their website.
These are some of the tips that have worked well for some who want to generate hundreds and even thousands on their websites.  It is important to know though that ads are displayed because it fits the interest of the people viewing them. So focusing on a specific topic should be your primary purpose because the displays will be especially targeted on a topic that persons will be viewing already.
Note also that there are many other Adsense sharing the same topic as you. It is best to think of making a good ad that will be somewhat different and unique than the ones already done. Every clickthrough that visitors make is a point for you so make every click count by making your Adsense something that people will definitely click on.
Tips given by those who have boosted their earnings are just guidelines they want to share with others. If they have somehow worked wonders to some, maybe it can work wonders for you too. Try them out into your ads and see the result it will bring.
If others have done it, there is nothing wrong trying it out for yourself.

Saturday, October 15, 2011

Easy Tips for Editing Effects and Photograph Spider’s Web

An individual with wonderful opportunities for photographers, but also many challenges is the spider’s web. There is something about their delicate nature (while being incredibly strong for their size), flexibility and beauty that draws me every time.



Friday, October 7, 2011

Create a Surreal Landscape-Using Photo Manipulation

In this tutorial I will give you some tips on how to make a surreal photo manipulation. The most challenging of doing manipulation is usually finding the right balance between your imported elements. Also the color of your elements and dynamic lightning are important things to make the scene more “believable” (not too realistic in this case).

I’ll use a selection of stock images (free and paid) to build the composition. This is just my selection. If you don’t want to use paid images, there are also tons of free images on the internet to use to complete this tutorial.

Stock images used:

Wegraphics material used
Noise Effect Textures

Preview:

Step 1

Start out with opening the landscape image. I used a canvas of 3000 px width with a resolution of 300 dpi. Always try to work on a big canvas with high-resolution images. This gives you more freedom on scaling your images at a later stage.

Step 2

This already is a beautiful heavily colored image but I want choose my own color placement. Place a black and white adjustment layer on top of the background image. The image will now be full black and white. The next thing to do is adding a layer mask to the adjustment layer. After that take a big soft brush (60%) and brush the spots you want to have color.

Step 3

We continue by adding the main image from the composition; the floating castle. Place the image on your canvas, scale it and use your pentool to cut-out everything except the castle. Add a mask to the layer so you can always change or adjust your selection later.

Step 4

The castle looks pretty plain without too much contrast. Let’s add some more depth to the image. Duplicate the image, desaturate the top image and set the blending mode to “soft light”. On top of the duplicated image you can add a “curves” adjustment layer. Play round with the curve until you are satisfied. Don’t forget to clip the adjustment layer to the two layers below them. When you do that it will only affect those layers and not your whole image.

Step 5

Use the mountain image to place under the castle. Cut out the sky and use your warp-tool (edit -> transform -> warp) to position the rock around the castle as shown in the image.

Step 6

When the rock is place on top of the castle layer, it’s time to blend them together. Create a layer mask on the layer and use a soft brush (80%) to remove small piece of the top and sides of the rock image.

Step 7

To finalize the floating castle image for now, you need to also duplicate the rock image, desaturate it and set the blending mode to “soft light”. To add even more depth / shadow to the rock you can add a clipping mask on top of the rock and use a soft black brush to darken certain spots.

Step 8

To add some more focus to your image you can add an inner shadow. I prefer to draw them myself so you have more control over it. Use a big soft black brush (80%) and make the corners of the image a bit darker.

Step 9

To give the scene a more “dreamy” and “warm” look you need to make some color adjustments. Create a new folder on top of all your layers and add the following adjustment layers.
Selective color:
Yellow: 0, 0, 0, +35
Neutrals: +25, 0, 0, 0
Blacks: +2, -3, 0, -4
Photo filter:
40%
Color fill blue: 
color: #3ABDEE, set blending to soft light 30%
Color fill yellow:
color: #FFD200, set blending to multiply 15%
Brightness / contrast:
Brightness: 0
Contrast: 35

Step 10

For making the rope I used this texture. As you can see the rope texture needs to be tiled cause it’s too short to use. Just remove the background from the texture and blend the images together. Use a soft brush to clear the hard edges when putting the images on top of one another.

Step 11

Place the tiled texture of the rope on your canvas and scale it / rotate it till it’s in the right place. After that use your perspective tool to give depth to the rope. To add some more realism on the depth you can blur the closest part of the rope a bit with your blur tool and draw a shadow under the rope. To add more contour to the rope you can always use the method used with the rock and the castle. (duplicate the image and blend).

Step 12

At this stage we’re going to add more castles. You can duplicate the one you made, but it’s more fun to add some extra different castles. Use the same technique used in the first castle scale it down and set the opacity of the image to 80%. That way it look less sharp and more in the distance then the main castle. You could also choose to blur it a bit.

Also we need to add an extra light source. Create a big white radial gradient between the two castles and pull the opacity down to 40%. Place the planet image on top of the radial gradient. Create a layer mask and remove the right top of the planet with a soft brush. After that desaturate the image and give it a “soft light” blending mode with a 70% opacity.
Now use the same routine by adding the big planet. Place the image on your canvas. Create a layer mask on your image layer and use a soft brush to remove the lower and left side of the planet. Also desaturate / soft light and set your opacity to 70%.

Step 13

This step is pretty difficult and hard to explain. We are going to add an extra layer on top of the background to add some details to the landscape. Place the cave image on your canvas. Scale it till it’s just as big as your canvas. Now remove the background (air) from the image and only keep the part circled in red. Make sure this image is placed on top of you background so it shows up behind the elements you already added.

It really about spatial awareness and what works best for you in the landscape. In the layer picture you can view the parts I masked from the cave image to achieve this.

Step 14

Place the image of the bridge on your canvas. Scale it down to the size as shown in the image. I choose a image of a bridge where the viewpoint already is good to use. If you have for example use a image of a bridge shot from the side you can use your perspective tool the change give it more depth.
Don’t pen-tool the bridge image out completely. Keep some of the water parts under the bridge in tact and try to blend them together with the water which is in the background. Duplicate the bridge and give the top layer a “multiply” blending mode of 70%

Use the folowing settings to change to color of the bridge and clip them to the top layer of the bridge
Brightness / contrast:
Brightness: 2
Contrast: 20
Levels:
54 / 1,00 / 255

Step 15

As you can see in the steps before it’s recommendable to use adjustment layers to change the color of your elements. This way you work non-destructive and can always tweak the settings at a later stage.
The last thing I want to explain is adding the “houses” to the rock on the left. ?Place the image of the stone house on your canvas and give it the following adjustment layers:
Brightness / contrast:
Brightness: -3
Contrast: 5
Hue / Saturation:
-12, -6, -12
Remove the sky from the image and try to blend in the image into the background with a soft brush on a layer mask. Now duplicate the layer and set the blending mode to “overlay”. This gives the image a little more contrast.

I added some hi-lites to some parts of the rock to add contrast and depth. To add hi-lites, you simple put a layer on top of your image and use a white brush (50%) with “overlay” blend mode.

Step 16

The rest of building the composition is really up to your own imagination. To finalize the piece I added some extra elements that were placed with the various techniques explained in the tutorial. To give the image a even more vintage / dreamy look I added a noise effect texture. Place this texture on top of your image and set blend mode to “soft light” (50%).

Final Result

Thursday, October 6, 2011

Tron Legacy Tutorial

Since the very first time I saw the trailer of Tron Legacy I decided that I would have to try to do something inspired on that, all those light effects were exactly what I always love to do in Photoshop. Then I saw the James White designinspired by Tron and I was damn it, James nailed it. So I postponed my little experiment, however this week I decided that the time had come and so, I decided to recreate the logo effect we see in the trailer.

For this tutorial I used Adobe Illustrator, Adobe Photoshop and Cinema 4D. Pretty much all the light effects and composition are done in Photoshop, the other apps were used just to create some shapes and elements, so if you want to do just the Photoshop part, in the of the tutorial there is a ZIP file with all the resource files used for this image.

Step 1

The first thing to do is find or create the logotype of Tron Legacy. I found a vector file online with it. Then open it in Illustrator and convert the strokes to fill (Object>Path>Outline Stroke). Export the file in a very low version of Illustrator, I'm using Illustrator 8.
Tron Legacy Tutorial

Step 2

Once you have the vector logo it's time to create the 3D version of it. We could use Photoshop Repoussé to create that but I decided to do it in Cinema 4D because I've been practicing more with it. So once you  import the shape just apply a basic extrusion. You can download the Cinema 4D file in the end of the tutorial
Tron Legacy Tutorial

Step 3

One thing that was really cool with the Tron Legacy logo was that sort of digital pattern it has in the light effect, so to create that I used a simple Tiles texture for my material, that is a default preset in Cinema 4D. The color is not important because we will change that in Photoshop later on.
Tron Legacy Tutorial

Step 4

Here is the Objects I have in Cinema 4D, as you can see there is all the shapes with the Extrude NURBS and the material. I also added 2 lights and a camera to get the right perspective.
Tron Legacy Tutorial

Step 5

Here is the final render in Cinema 4d. You can download the TIFF file in the end of the tutorial.
Tron Legacy Tutorial

Step 6 - Photoshop

Open the logo in Photoshop and now let's start editing and creating the light effects. The first thing to do is change the Hue and Saturation. Go to Image>Adjustments>Hue and Saturation. Use 190 for the Hue, 50 for the Saturation and 0 for the Lightness.
Tron Legacy Tutorial

Step 7

Go to Image>Adjustment>Levels. Change the black input to 30, the grey input to 1 and the white input to 131.
Tron Legacy Tutorial

Step 8

Import the vector logo and make sure it's black, you can add a color overlay through Layer>Layer Style>Color Overlay.
Tron Legacy Tutorial

Step 9

Go to Edit>Transform>Scale, reduce the size so it's a size between the front and the back faces.
Tron Legacy Tutorial

Step 10

Go to Filter>Blur>Gaussian Blur. Use 15 pixels for the Radius.
Tron Legacy Tutorial

Step 11

Duplicate the layer in order to make this dark effect darker.
Tron Legacy Tutorial

Step 12

Import the vector logo again and position it in front of the 3D logo, this will be the neon effect.
Tron Legacy Tutorial

Step 13

Go to Layer>Layer Style>Color Overlay. Use #86f7fe for the color with 60% Opacity. Also over the Blending Options, reduce the Fill color to 0%.
Tron Legacy Tutorial

Step 14

After that select Inner Glow. Use Color Dodge for the Blend Mode at 50% Opacity. For the color use white. Change the Source to Edge and use 0% for the Choke and 10 pixels for the Size.
Tron Legacy Tutorial

Step 15

Select Inner Shadow. Use Color Dodge for the Blend Mode with White for the color at 50%. Use 120º for the Angle, 8 pixels for the Distance, 0% for the Choke and 10 pixels for the Size.
Tron Legacy Tutorial

Step 16

Now, select Drop Shadow. Use Screen for the Blend Mode with white for the color at 50%. For the Distance use 0, for the Spread 15% and for the Size 30 pixels.
Tron Legacy Tutorial

Step 17

The last option will be Outer Glow. Use Color Dodge for the Blend Mode, 100% for the Opacity, white for the Color. Them for the Spread and Size use 0.
Tron Legacy Tutorial

Step 18

Now go to Layer>New Adjustment Layer>Hue and Saturation. Use 195 for the Hue, 90 for the Saturation, -20 for the Lightness.
Tron Legacy Tutorial

Step 19

Select all layers including the background and duplicate them, after that merge all the duplicated layers into a new one and go to Filter>Blur>Gaussian Blur. Use 10 pixels for the radius.
Tron Legacy Tutorial

Step 20

Change the Blend Mode of the blurry layer to Screen at 80% Opacity.
Tron Legacy Tutorial

Step 21

Again go to Layer>New Adjustment Layer>Hue and Saturation. Use 7 for the Hue, 50 for the Saturation and 0 for the Lightness.
Tron Legacy Tutorial

Step 22

Again select all the layers and duplicate them, after that merge the duplicated layers into just one. You can do that using the keyboard shortcut Command (MAC)/ Control (PC) + Alt + Shift + E. After that just change the Blend Mode to Screen at 50% Opacity.
Tron Legacy Tutorial

Step 23 - Logo Conclusion

The Tron logo is pretty much done, as you can see we were able to create the nice 3D/light efect as we see in the trailer and we used basically Blend Modes and Adjustment Layers. For the Legacy text I used  Helvetica Neue Ultra Light with a nice teal glow. You can save your file and end the tutorial here, but I want to show you how I created the whole composition.
You can group all these layers and name the folder logo. Also you can duplicate the group and merge it into a layer so we will use only that file in the end of the tutorial. As it has a black background, change its Blend Mode to Screen as well, then hide it.
Tron Legacy Tutorial

Layer Order

This is the layers order. You can see that it's quite simple.
Tron Legacy Tutorial

Step 25

To create the composition like we see in the posters and in the trailer the first thing we will need is a city skyline photo to use in the background. The one I used is from Shutterstock and you can find it here http://www.shutterstock.com/pic-66610090/stock-photo-new-york-cityscape..... So basically just desaturate the image (Image>Adjustment>Desaturate) and then go to Image>Adjustments>Levels and increase the black inputs and the white inputs. After that go to Filter>Blur>Gaussian Blur and use something around 10-20 pixels for the Radius. The idea is make it very blurry.
Tron Legacy Tutorial

Step 26

Now go to Layer>New Adjustment Layer>Hue and Saturation. Use 190 for the Hue, 40 for the Saturation and -50 for the Lightness. Also select the Colorize option. This adjustment layer will give that teal color to the image.
Tron Legacy Tutorial

Step 27

Back to Illustrator create a few rounded rectangles using the Rounded Rectangle Tool. Also create a few circles and an empty space where it will be the sort of highaway crossing the grid.
Tron Legacy Tutorial

Step 28

Copy the shapes in Illustrator and paste that in Photoshop, below the the Adjustment Layer. Also make sure the vectors are white so you will make them teal. Once you paste the grid from Illustrator, go to Edit>Transform>Distort. Distort the layer to get the perspective like the image below.
Tron Legacy Tutorial

Step 29

Go to Filter>Blur>Guassian Blur. Use 5 pixels for the Radius.
Tron Legacy Tutorial

Step 30

Duplicate this layer and move it down a few pixels and then change the Opacity to 20%. That will create the reflection in the grid.
Tron Legacy Tutorial

Step 31

Duplicate the grid layer again and move it above the Adjustment Layer. Group this copy into a folder and change the folder's Blend Mode to Color Dodge. After that select the layer inside the folder and go to Filter>Blur>Gaussian Blur. Use 10-15 pixels for the radius. That will depend on the shapes you created.
Tron Legacy Tutorial

Step 32

Hide the city skyline layer and then select all the layers and duplicate them, after that merge all the duplicated layers into one layer only then go to Filter>Blur>Gaussian Blur. Use 10 pixels for the Radius.
Tron Legacy Tutorial

Step 33

Change the Blend Mode of that layer to Screen at 100% Opacity. Also make the city skyline layer visible again.
Tron Legacy Tutorial

Step 34

Add a layer on top of the others and with the Paint Bucket Tool (G), change the type to Pattern and fill this layer with a scanline pattern. To create this scanline pattern is pretty easy. Just create a new document of 100x4 pixels and then create a rectangle of 100x2 in black. Also make sure that the background is white. Merge all layers and then go to Edit>Define Pattern. Just name it and that is it.
With the Eraser Tool (E) delete the pattern area that is above the city skyline, the idea is that the effect will be visible only in the grid and city.
Tron Legacy Tutorial

Step 35

Change the Blend Mode of the Pattern to Overlay at 15%.
Tron Legacy Tutorial

Conclusion

Now make the Tron logo layer visible again and position it in the center of the composition. After that add a new layer and go to Filter>Render>Render Clouds. Make sure you had black and white for the colors. Then change the Blend Mode to Screen and the Opacity to 40%. With the Eraser Tool (E) you can delete pretty much all the areas close to the edges leaving only the area that is behind the logo and a bit on top of it.
You can also add the same pattern overlay effect over the Legacy text to give that nice digital touch. Once again everything we did was done using simple tools and techniques mixed together, the most difficult part is understand and organize the thoughts, the software part is all about trial and error. So now it's up to you.
Tron Legacy Tutorial

Download the Files